X Air Edit Behringer How To Send A

That means youll learn how the routing menu works and how to send a bus from an aux output to a stage monitor.

Routing more or less means assigning the input and outputs of a device, but what does that mean for X AIR mixers In the sections below well explain what routing is, how to do it, and when to do it.

For the X AIR mixers, this usually means selecting which Inputs show up on each mix channel and then which channels or busses are output from the Aux or Main outputs.

So if you want to assign a specific bus to a specific output for a stage monitor, youll need to route it.

The default IO settings will work for a typical live sound setup, but understanding the routing menu is essential to operating the device.

This is because each analog input (microphone, instrument, etc.) is assigned to its respective X AIR mixer channel.

That means analog input 1 goes to the mixer channel 1, 2 to 2, and so forth.

This type of routing is standard for traditional analog mixers because they are hardwired.

While you dont need to modify these settings very often, there are some useful purposes to do so.

That means you can connect a guitar to input 1, but have it show up on both channels 1 and 2.

Channel 1 can get a certain effect and channel 2 a different one.

To do so, youll first need to assign them within the USB Returns menu and then enabled by turning on USB for each respective channel.

Assigning USB playback can be useful when playing audio files from a USB stick, too.

If your device isnt connecting, be sure to check out our guides on how to resolve audio interface issues on PC and Mac.

To get stereo USB playback from your computer (iTunes, Spotify, YouTube, etc.), either use the USB Returns menu to assign USB 1-2 to a stereo channel or bypass the main mix by assign USB 1-2 directly to the Main LR or Headphones.

To select which signals are sent to an Aux out, route it to the desired output within the Aux Out menu.

That means the inputs signal enters the mixer, is sent to a bus, and is then routed to an Aux output jack.

For stage monitors, assign a mix Bus to the Aux Output its connected to, and then send each desired channel to that Bus.

This means you can determine when the signal is sent to the monitor, as to bypass or allow the mute, EQ, and fader level functions.

For instance, if a bus is assigned to an aux output as pre fader, the signal will be sent prior to the bus volume fader.

That means the bus volume fader and mute will not affect the bus signal going to the stage monitor.

If it were post fader, the opposite would be true and both would affect the signal present in the stage monitor.

Each channel level fader now controls its respective Bus level send.

Free X Air Edit Behringer For Mac